How to build EmberZnet 7.1.0.0 Z3Gateway on Raspberry Pi.

 The following steps show you how to build EmberZnet 7.1.0.0 Z3Gateway on Raspberry Pi.

 

1. Install Simplicity Studio v5 and GSDK 4.1.0 on Ubuntu 20.04LTS. For example, GSDK 4.1.0 is installed at "~/SimplicityStudio/SDKs/gecko_sdk_2" in my test.

2. Start Simplicity Studio File->New->Silicon Labs Project Wizard... and set "Target Device" as "Linux 32 Bit" to click NEXT button.

 

3. Select "Zigbee - Host Gateway" and click NEXT button.

 

4. Make sure you set project location to under your GSDK 4.1.0 folder such as my example "/home/yk/SimplicityStudio/SDKs/gecko_sdk_2/Z3Gateway" and select "Copy contents" to click FINISH button.

5. Download and setup 2022-04-04-raspios-bullseye-armhf-lite.img for your Raspberry Pi.

6. Use sftp to copy the whole "/home/yk/SimplicityStudio" folder contents to your Raspberry Pi home folder.

7. Change direct to "~/SimplicityStudio/SDKs/gecko_sdk_2/Z3Gateway" on your Raspberry Pi and run "make -f Z3Gateway.Makefile" to build Z3Gateway

8. After build successfully, you will get Z3Gateway binary under "~/SimplicityStudio/SDKs/gecko_sdk_2/Z3Gatewaybuild/debug/". You can run Z3Gateway by "Z3Gateway -p /dev/ttyACM0" under this folder.