Showing posts with label LAUNCHXL-CC26x2R1. Show all posts
Showing posts with label LAUNCHXL-CC26x2R1. Show all posts
Tuesday, September 1, 2020

How to remove OAD feature on CC26x2/CC13x2 project_zero

›
 The following steps show you how to remove OAD feature on CC26x2/CC13x2 project_zero  1. Replace C:\ti\simplelink_cc13x2_26x2_sdk_4_10_0...
Tuesday, August 25, 2020

Build OpenThread Sleepy End Device doorlock prototype to test with Rasperry Pi OpenThread Border Router

›
The following steps show how to build OpenThread Sleepy End Device doorlock prototype to test with Rasperry Pi OpenThread Border Router 1...
Tuesday, June 16, 2020

How to use two UARTs in CC26x2 and CC13x2.

›
The following steps show you how to enable second UART in CC26x2 and CC13x2 using uartecho example. 1. Add second UART CONFIG_UART_1 fr...
Thursday, June 4, 2020

How to add you own custom board files to CC26xx BLE stack

›
The following steps show you how to add you own custom board files to CC26xx BLE stack using CC2650 BLE stack 2.2.04.06 version 1. Cr...
1 comment:
Monday, April 13, 2020

How to use two endpoints in SIMPLELINK-CC13X2-26X2-SDK Z-Stack.

›
The following steps show you how to use two endpoints in SIMPLELINK-CC13X2-26X2-SDK Z-Stack zed_sw example. 1. Define a new SAMPLESW_E...
Wednesday, December 18, 2019

How to change CC26xx/CC13xx UART baudrate dynamically in your application.

›
The following steps show you how to change CC26xx/CC13xx UART baudrate dynamically in your application. 1. In port pininterrupt example ...
Tuesday, December 17, 2019

How to create a periodic event to toggle BLE Advertising in CC26xx simple_peripheral example

›
The following steps show you how to create a periodic event to toggle BLE Advertising every 10 seconds in CC26xx simple_peripheral example...
1 comment:
Monday, December 16, 2019

How to use indication in simple_peripheral example and use Btool to enable indication.

›
The following steps show you how to revise CC26xx simple_peripheral example to use indication in simple_peripheral example and use Btool t...
Thursday, October 17, 2019

How to create micro second delay on CC2652R

›
The following codes show you how to create micro second delay on CC2652R 1. Use the following functions to create one micro second delay...
Wednesday, September 25, 2019

How to use internal temperature reading inside CC26xx/CC13xx

›
The following codes show you how to use internal temperature sensor reading inside CC26xx/CC13xx. 1. Add "#include DeviceFamily_const...
Wednesday, August 14, 2019

How to enable hex and float value output from System_printf in TI CC13xx/CC26xxx SDK.

›
The following steps show you how to enable hex and float value output from System_printf in TI CC13xx/CC26xxx SDK. 1. Add "System.e...
Wednesday, July 31, 2019

Use PWM_PERIOD_HZ/PWM_DUTY_FRACTION to generate PWM for TI CC26xx/CC13xx devices.

›
You can replace the following mainThread function call in pwmled2 example to use PWM_PERIOD_HZ/PWM_DUTY_FRACTION to generate PWM for TI C...
Monday, May 6, 2019

How to check APS ack in TI Z-Stack

›
The following steps show you how to check APS ack in TI Z-Stack using ON/OFF cluster toggle command in SampleSwitch example. 1. Setup On...
Tuesday, December 4, 2018

How to detect button hold in CC26x2, CC13x0, CC13x2 SDK.

›
The following steps show you how to detect button hold in CC26x2, CC13x0, CC13x2 SDK. I use zed_switch example to add related code to dete...