Showing posts with label LAUNCHXL-CC1310. Show all posts
Showing posts with label LAUNCHXL-CC1310. Show all posts
Tuesday, February 4, 2020

CC13xx TRX WOR project

›
The following steps show you how to combine CC13xx  rfWakeOnRadioRx into rfWakeOnRadioTx to do TX/RX in the same WOR project. 1. Import ...
Wednesday, December 18, 2019

How to change CC26xx/CC13xx UART baudrate dynamically in your application.

›
The following steps show you how to change CC26xx/CC13xx UART baudrate dynamically in your application. 1. In port pininterrupt example ...
Tuesday, August 13, 2019

How to use usleep/sleep function in CC1310 TI 15.4 Stack

›
The following steps show you how to use usleep/sleep function in CC1310 TI 15.4 Stack: 1. Add "var Settings = xdc.useModule('ti...
Wednesday, July 31, 2019

Use PWM_PERIOD_HZ/PWM_DUTY_FRACTION to generate PWM for TI CC26xx/CC13xx devices.

›
You can replace the following mainThread function call in pwmled2 example to use PWM_PERIOD_HZ/PWM_DUTY_FRACTION to generate PWM for TI C...
Thursday, January 17, 2019

How to output 32K crystal signal to specific pin on LAUNCHXL-CC2640R2

›
The following steps show you how to output 32K crystal signal to specific pin on LAUNCHXL-CC2640R2 using simple_peripheral example. 1. A...
Thursday, October 11, 2018

How to use serial bootloader mode to download binary to LAUNCHXL-CC1310/LAUNCHXL-CC2650 using Flash Programmer 2

›
The following steps show you how to use serial bootloader mode to download binary to LAUNCHXL-CC1310/LAUNCHXL-CC2650 using Flash Programme...
Monday, April 23, 2018

How to connect Contiki-NG cc26xx-web-demo to IBM Watson IoT Platform.

›
The following steps show you how to connect Contiki-NG cc26xx-web-demo (running on LAUNCHXL-1310 or LAUNCHXL-CC2650) to IBM Watson IoT Pla...
3 comments:
Thursday, April 19, 2018

How to build and run Contiki-NG cc26xx-web-demo running on LAUNCHXL-CC1310 and rpl-border-router on Raspberry Pi with slip radio running on LAUNCHXL-CC1310

›
The following steps show how to build and run Contiki-NG cc26xx-web-demo running on LAUNCHXL-CC1310 (or LAUNCHXL-CC2650) and rpl-border-ro...
8 comments:

Build and run 6lbr/Contiki-NG cc26xx-web-demo on Rasperry Pi with LAUNCHXL-CC1310/LAUNCHXL-CC2650

›
The following steps show how to build and run 6lbr/Contiki-NG cc26xx-web-demo on Rasperry Pi with LAUNCHXL-CC1310/LAUNCHXL-CC2650: 1. Bu...
30 comments:
Tuesday, April 17, 2018

How to use 6lbr node config to enable IPv4 port mapping to allow accessing to cc26xx-web-demo from IPv4 address with mapped port on Raspberry Pi.

›
The following steps show you how to use 6lbr node config to enable IPv4 port mapping to allow accessing to cc26xx-web-demo from IPv4 addre...
Tuesday, April 10, 2018

Connect IBM quickstart of Contik cc26xx-web-demo to node-red for data processing.

›
The following steps show you how to connect IBM quickstart of Contik cc26xx-web-demo to node-red for data processing. 1.Login to IBM Blu...