Showing posts with label Contiki. Show all posts
Showing posts with label Contiki. Show all posts
Tuesday, April 24, 2018

How to setup Mosquitto on Raspberry Pi and make Contiki/Contiki-NG cc26xx-web-demo do mqtt publish to it.

›
The following steps show you how to setup Mosquitto on Raspberry Pi and make Contiki/Contiki-NG cc26xx-web-demo do mqtt publish to it. 1...
1 comment:
Tuesday, April 10, 2018

Connect IBM quickstart of Contik cc26xx-web-demo to node-red for data processing.

›
The following steps show you how to connect IBM quickstart of Contik cc26xx-web-demo to node-red for data processing. 1.Login to IBM Blu...
Wednesday, November 29, 2017

Using Contiki UDP client to send ON/OFF command to remote UDP server to toggle LED on CC13xx/CC26xx.

›
The following steps show you how to revise Contiki UDP client/server examples to allow you send UART ON/OFF command to UDP client, UDP cli...
1 comment:
Thursday, October 19, 2017

Using CC13xx/CC26xx running Contiki OS to toggle LED from UART.

›
The following example shows how to using CC13xx/CC26xx running Contiki OS to toggle LED from UART. 1. Replace the following code into he...
2 comments:
Friday, March 3, 2017

How to run Contiki udp-server/udp-client on LAUNCHXL-CC2650.

›
The following steps show you how to run Contiki udp-server/udp-client on LAUNCHXL-CC2650. 1. Do "make TARGET=srf06-cc26xx BOARD=lau...
2 comments:
Wednesday, February 15, 2017

How to do settings to allow access 6lbr from Internet

›
The following steps show you how to do settings to allow access 6lbr from Internet. Let's say we have a Internet router (mine is Asus ...
5 comments:
Thursday, February 9, 2017

How to add a COAP resource to read ADC input from DIO23 in Contiki cc26xx-web-demo on CC2650 LaunchPad.

›
To add a COAP resource to read ADC input from DIO23 in Contiki cc26xx-web-demo on CC2650 LaunchPad, you have to add the following code wit...
15 comments:
Wednesday, July 20, 2016

How to use CC2650DK, CC2650 LaunchPad, or CC2650STK as Contiki 6LowPAN Sniffer.

›
The following steps show you how to use CC2650DK, CC2650 LaunchPad, or CC2650STK as Contiki 6LowPAN Sniffer. 1. git clone --recursive ht...

How to use CC2650DK, CC2650 LaunchPad, or CC2650STK as Contiki 6LowPAN Sniffer.

›
The following steps show you how to use CC2650DK, CC2650 LaunchPad, or CC2650STK as Contiki 6LowPAN Sniffer. 1. git clone --recursive ht...
Wednesday, April 6, 2016

Contiki CC2650 ADC demo using DIO23 as ADC input

›
The following code shows how to use CC2650 DIO23 as ADC input to read analog signal in Contiki OS. 1. Replace the following code to hell...
2 comments:
Tuesday, March 22, 2016

Running 6lbr on CC2538DK with ENC28J60 and make CC2650STK send sensor data to IBM MQTT quickstart service.

›
The following steps show how to run 6lbr on CC2538DK with ENC28J60 and make CC2650STK send sensor data to IBM MQTT quickstart service. F...
4 comments:
Thursday, November 12, 2015

How to build DTLS example for SmartRF06EB+CC2650EM in Contiki 6LowPAN

›
The following steps show you how to build DTLS example for SmartRF06EB+CC2650EM in Contiki 6LowPAN. On SmartRF06EB+CC2650EM side: 1. Do...
2 comments:
Wednesday, November 11, 2015

How to build/set Contiki rpl-border-router on SmratRF06EB+CC1350EM and run tunslip6

›
The following steps show how to build/set Contiki rpl-border-router on SmratRF06EB+CC1350EM and run tunslip6 in Contiki VMPlayer. 1. Go to...
5 comments:
Wednesday, September 9, 2015

How to build Contiki 6lbr Slip Radio on CC2650 SensorTag or SmartRF06EB+CC2650EM

›
Do the following steps to build Contiki 6lbr Slip Radio for CC2650 SensorTag+CC-DEVPACK-DEBUGGER. 1. Change "#if BOARD_CONF_DEBUGGER...
6 comments:
Monday, September 7, 2015

Build 6LowPAN Contiki SubG Hz Sniffer for CC1350

›
Use the following steps to build 6LowPAN Contiki SubG Hz Sniffer for CC1350. 1. Go to  contiki/examples/cc2538dk/sniffer. 2. Add the foll...
Thursday, September 3, 2015

Contiki SubG Hz 6LowPAN on CC1350

›
To test on Contiki SubG Hz 6LowPAN on CC1350, I use SmartRF06EB+CC1350EM with FT232 USB-to-Serial dongle to act as Slip Radio which is conn...
13 comments:
Friday, August 21, 2015

How to build Contiki 6lbr Slip Radio on CC2538EM with USB Drivers

›
1. Git the latest Contiki code by running "git clone --recursive https://github.com/contiki-os/contiki" 2. Open Makefile under e...
Monday, August 17, 2015

Setup 6lbr to run 6LowPAN with CC2531 USB dongle on Raspberry Pi 2B

›
1. Unzip and flash a CC2531 USB dongle with cc2531-slip-radio_contikimac.zip . 2. SSH login to Raspberry Pi. 3. sudo apt-get install libn...
13 comments:

How to setup Contiki Sniffer for 6LowPAN using CC2531 USB dongle or CC2538EM

›
The following steps show you how to setup Contiki Sniffer on Mac OS for 6LowPAN using CC2531 USB dongle in details. 1. Download  pyserial...
2 comments: