Showing posts with label CC2531. Show all posts
Showing posts with label CC2531. Show all posts
Friday, February 10, 2017

Use ZTool + Z-Stack 3.0 ZNP to set up a basic Zigbee 3.0 network

›
The following steps show you how to use ZTool + Z-Stack 3.0 ZNP to set up Zigbee 3.0 network: 1. You have to prepare two CC253x EVBs (CC...
23 comments:
Thursday, October 27, 2016

How to create a periodic event for CC253x/CC254x Z-Stack and BLE Stack.

›
The following codes show example to create a periodic event that is triggered every 5 seconds for CC253x in Z-Stack and you can do it acco...
3 comments:
Friday, October 23, 2015

How to do device binding from TI Ztool and CC2531 USB dongle to CC2650 SensorTag using ZDO_BIND_REQ.

›
The following steps show how to do device binding from TI Ztool and CC2531 USB dongle to CC2650 SensorTag using  ZDO_BIND_REQ. 1. Refer t...
1 comment:

Setup Zigbee HA coordinator with TI Ztool and CC2531 USB dongle and use CC2650 SensorTag as Zigbee end device to join coordinator.

›
The following steps show you how to setup Zigbee HA coordinator with TI Ztool and CC2531 USB dongle and use CC2650 SensorTag as Zigbee end ...
2 comments:

Setup Zigbee HA coordinator with TI Ztool and CC2531 USB dongle and use CC2650 SensorTag as Zigbee end device to join coordinator.

›
The following steps show you how to setup Zigbee HA coordinator with TI Ztool and CC2531 USB dongle and use CC2650 SensorTag as Zigbee end ...
3 comments:
Wednesday, August 26, 2015

How to create a periodic event in TI Z-Stack or BLE-Stack

›
The following codes are example to start PERIODIC_EVT every second and you can do any periodic processing in PERIODIC_EVT. //Put where...
Monday, August 17, 2015

Setup 6lbr to run 6LowPAN with CC2531 USB dongle on Raspberry Pi 2B

›
1. Unzip and flash a CC2531 USB dongle with cc2531-slip-radio_contikimac.zip . 2. SSH login to Raspberry Pi. 3. sudo apt-get install libn...
13 comments:

How to setup Contiki Sniffer for 6LowPAN using CC2531 USB dongle or CC2538EM

›
The following steps show you how to setup Contiki Sniffer on Mac OS for 6LowPAN using CC2531 USB dongle in details. 1. Download  pyserial...
2 comments: