Showing posts with label 6LowPAN. Show all posts
Showing posts with label 6LowPAN. Show all posts
Tuesday, August 25, 2020

Build OpenThread Sleepy End Device doorlock prototype to test with Rasperry Pi OpenThread Border Router

›
The following steps show how to build OpenThread Sleepy End Device doorlock prototype to test with Rasperry Pi OpenThread Border Router 1...
Friday, August 21, 2020

Running OpenThread Border Router and device with Raspberry Pi and Silicon Labs EFR32 Kits

›
Silicon Labs releases Simplicity Studio v5 which supports OpenThread in the end of July 2020. To run the whole thing, you will need one...
1 comment:
Monday, October 23, 2017

How to configure 6lbr to make it can do ping6 to a CC26xx/CC13xx node from Raspberry Pi running 6lbr.

›
The following steps shows you how to configure 6lbr to make it can do ping6 to a CC26xx/CC13xx node from Raspberry Pi running 6lbr. 1. R...
8 comments:
Wednesday, July 20, 2016

How to use CC2650DK, CC2650 LaunchPad, or CC2650STK as Contiki 6LowPAN Sniffer.

›
The following steps show you how to use CC2650DK, CC2650 LaunchPad, or CC2650STK as Contiki 6LowPAN Sniffer. 1. git clone --recursive ht...

How to use CC2650DK, CC2650 LaunchPad, or CC2650STK as Contiki 6LowPAN Sniffer.

›
The following steps show you how to use CC2650DK, CC2650 LaunchPad, or CC2650STK as Contiki 6LowPAN Sniffer. 1. git clone --recursive ht...
Tuesday, March 22, 2016

Running 6lbr on CC2538DK with ENC28J60 and make CC2650STK send sensor data to IBM MQTT quickstart service.

›
The following steps show how to run 6lbr on CC2538DK with ENC28J60 and make CC2650STK send sensor data to IBM MQTT quickstart service. F...
4 comments:
Thursday, November 12, 2015

How to build DTLS example for SmartRF06EB+CC2650EM in Contiki 6LowPAN

›
The following steps show you how to build DTLS example for SmartRF06EB+CC2650EM in Contiki 6LowPAN. On SmartRF06EB+CC2650EM side: 1. Do...
2 comments:
Wednesday, November 11, 2015

How to build/set Contiki rpl-border-router on SmratRF06EB+CC1350EM and run tunslip6

›
The following steps show how to build/set Contiki rpl-border-router on SmratRF06EB+CC1350EM and run tunslip6 in Contiki VMPlayer. 1. Go to...
5 comments:
Wednesday, September 9, 2015

How to build Contiki 6lbr Slip Radio on CC2650 SensorTag or SmartRF06EB+CC2650EM

›
Do the following steps to build Contiki 6lbr Slip Radio for CC2650 SensorTag+CC-DEVPACK-DEBUGGER. 1. Change "#if BOARD_CONF_DEBUGGER...
6 comments:
Monday, September 7, 2015

Build 6LowPAN Contiki SubG Hz Sniffer for CC1350

›
Use the following steps to build 6LowPAN Contiki SubG Hz Sniffer for CC1350. 1. Go to  contiki/examples/cc2538dk/sniffer. 2. Add the foll...
Thursday, September 3, 2015

Contiki SubG Hz 6LowPAN on CC1350

›
To test on Contiki SubG Hz 6LowPAN on CC1350, I use SmartRF06EB+CC1350EM with FT232 USB-to-Serial dongle to act as Slip Radio which is conn...
13 comments:
Monday, August 17, 2015

Setup 6lbr to run 6LowPAN with CC2531 USB dongle on Raspberry Pi 2B

›
1. Unzip and flash a CC2531 USB dongle with cc2531-slip-radio_contikimac.zip . 2. SSH login to Raspberry Pi. 3. sudo apt-get install libn...
13 comments:

How to setup Contiki Sniffer for 6LowPAN using CC2531 USB dongle or CC2538EM

›
The following steps show you how to setup Contiki Sniffer on Mac OS for 6LowPAN using CC2531 USB dongle in details. 1. Download  pyserial...
2 comments:
Tuesday, July 21, 2015

Setup Compile Environment on Windows Cygwin For CC2650/CC2538 Contiki 6LowPAN

›
The following step-by-step guide shows you how to setup compile environment on Win 7 Cygwin to build Contiki 6LowPAN For CC2650STK, CC2650D...
10 comments: