tag:blogger.com,1999:blog-5616331110146956954.post7690696016203804276..comments2024-02-28T21:27:59.019+08:00Comments on Sun May Sky: Setup 6lbr to run 6LowPAN with CC2531 USB dongle on Raspberry Pi 2B三妹http://www.blogger.com/profile/09702304615258996189noreply@blogger.comBlogger13125tag:blogger.com,1999:blog-5616331110146956954.post-19507541089116983012019-06-13T17:09:12.523+08:002019-06-13T17:09:12.523+08:00I use the same hardware and got a similar issue: n...I use the same hardware and got a similar issue: nothing happened after running "sudo service 6lbr start" and I cannot access [bbbb::100]., but my 6lbr.log is slightly different<br />Thu 13 Jun 09:45:38 BST 2019 : Starting 6LBR<br />/usr/lib/6lbr/bin/cetic_6lbr_router -c /etc/6lbr/nvm.dat -F /etc/6lbr/factory.dat -o /etc/6lbr/nvm.conf -s /dev/ttyS0 -r -t eth0 -B 115200 -U /usr/lib/6lbr/6lbr-ifup -D /usr/lib/6lbr/6lbr-ifdown -w /usr/lib/6lbr/www -L 3 -W /var/log/6lbr.timestamp -P 60 -C /var/log/6lbr.ip -m /usr/lib/6lbr/plugins<br />Contiki-contiki-6lbr-1.5.0-2562-g8013ba48d started with IPV6, RPL<br />Rime started with address 1.2.3.4.5.6.7.8<br />MAC multi-radio RDC br-rdc SEC nullsec NETWORK sicslowpan<br />2019-06-13 9:45:38.413242: NOTICE: 6LBR: Starting 6LBR version 1.5.x (Contiki-contiki-6lbr-1.5.0-2562-g8013ba48d)<br />2019-06-13 9:45:38.413437: INFO: SLIP: Allocated slip device 0 -> 0<br />2019-06-13 9:45:38.413523: INFO: ETH: 6LBR watchdog started (interval: 60)<br />2019-06-13 9:45:38.415118: INFO: NVM: NVM Magic : 2009<br />2019-06-13 9:45:38.415147: INFO: NVM: NVM Version : 6<br />2019-06-13 9:45:38.415165: INFO: CONFIG: Loading configuration : /etc/6lbr/nvm.conf<br />2019-06-13 9:45:38.415196: WARN: CONFIG: Can not open /etc/6lbr/nvm.conf : No such file or directory<br />2019-06-13 9:45:38.415227: NOTICE: 6LBR: Log level: 30 (services: ffffffff)<br />2019-06-13 9:45:38.415243: INFO: FRAMER: Using 802.15.4 framer<br />2019-06-13 9:45:38.415260: INFO: MAC: Using 'csma' mac driver<br />2019-06-13 9:45:38.415467: INFO: SLIP: SLIP started on /dev/ttyS0<br />2019-06-13 9:45:38.425645: INFO: SCMD: Started br-cmd process<br />2019-06-13 9:45:38.425671: INFO: BR-RDC: SLIP RADIO configured as RADIO<br />2019-06-13 9:45:38.425688: INFO: BR-RDC: Configuring SLIP RADIO 0 (API: 1.0)<br />2019-06-13 9:45:38.425704: INFO: BR-RDC: Reset SLIP Radio<br />2019-06-13 9:45:38.425723: INFO: BR-RDC: Fetching MAC address<br />2019-06-13 9:45:39.425046: INFO: BR-RDC: Fetching MAC address<br />2019-06-13 9:45:40.425043: INFO: BR-RDC: Fetching MAC address<br />2019-06-13 9:45:41.425042: INFO: BR-RDC: Fetching MAC address<br />Anonymoushttps://www.blogger.com/profile/09487003628413314086noreply@blogger.comtag:blogger.com,1999:blog-5616331110146956954.post-39162477330850959092019-03-23T10:58:02.415+08:002019-03-23T10:58:02.415+08:00Did you get it working? I got the same Did you get it working? I got the same Ahmedhttps://www.blogger.com/profile/12010777927099862482noreply@blogger.comtag:blogger.com,1999:blog-5616331110146956954.post-19327054228903471192018-04-02T21:57:20.090+08:002018-04-02T21:57:20.090+08:00i followed these steps but instead of the usb dong...i followed these steps but instead of the usb dongle i connected to RPI cc1310 launchpaf flashed with slip radio.<br />but nothing worked , do i need to change something in the setting?Anonymoushttps://www.blogger.com/profile/15592994670778434429noreply@blogger.comtag:blogger.com,1999:blog-5616331110146956954.post-83682242096327644082018-03-28T18:40:33.342+08:002018-03-28T18:40:33.342+08:00You can use CC2650 as slip radio instead of CC2531...You can use CC2650 as slip radio instead of CC2531三妹https://www.blogger.com/profile/09702304615258996189noreply@blogger.comtag:blogger.com,1999:blog-5616331110146956954.post-17048951715078888432018-03-28T18:35:43.912+08:002018-03-28T18:35:43.912+08:00why do i need CC2531 USB dongle i dont have itwhy do i need CC2531 USB dongle i dont have itAnonymoushttps://www.blogger.com/profile/15592994670778434429noreply@blogger.comtag:blogger.com,1999:blog-5616331110146956954.post-51761550114542020832018-03-01T08:36:26.864+08:002018-03-01T08:36:26.864+08:00I too got the 6lbr.service not found error initial...I too got the 6lbr.service not found error initially.<br />I tried make install again and found it to be working after that.<br /><br />pi@mypi:~/6lbr/examples/6lbr $ sudo service 6lbr start<br />pi@mypi:~/6lbr/examples/6lbr $ ps -eaf | grep 6lbr<br />root 30971 1 0 00:29 ? 00:00:00 /bin/sh /usr/lib/6lbr/6lbr /etc/6lbr/6lbr.conf<br />root 30978 30971 35 00:29 ? 00:00:08 /usr/lib/6lbr/bin/cetic_6lbr_router -c /etc/6lbr/nvm.dat -F /etc/6lbr/factory.dat -o /etc/6lbr/nvm.conf -s /dev/ttyS0 -r -t eth0 -B 115200 -U /usr/lib/6lbr/6lbr-ifup -D /usr/lib/6lbr/6lbr-ifdown -w /usr/lib/6lbr/www -L 3 -W /var/log/6lbr.timestamp -P 60 -C /var/log/6lbr.ip -m /usr/lib/6lbr/plugins<br />root 30979 30971 0 00:29 ? 00:00:00 /bin/sh /usr/lib/6lbr/6lbr-watchdog 30978 60 3 /var/log/6lbr.timestamp<br />pi 31098 983 0 00:29 pts/0 00:00:00 grep --color=auto 6lbr<br />pi@mypi:~/6lbr/examples/6lbr $<br />Ganihttps://www.blogger.com/profile/08092061696713992624noreply@blogger.comtag:blogger.com,1999:blog-5616331110146956954.post-55065006943045720372017-11-30T20:12:12.234+08:002017-11-30T20:12:12.234+08:00Hi, That's a great piece of work you done.
I...Hi, That's a great piece of work you done. <br /><br />I don't get the role of cc2531, Can you share it's purpose.<br /><br />ThanksAnonymoushttps://www.blogger.com/profile/16084338982453605328noreply@blogger.comtag:blogger.com,1999:blog-5616331110146956954.post-82524211342363605622017-10-05T12:12:48.094+08:002017-10-05T12:12:48.094+08:00Hi, i use CC1310 launchpad and raspberry pi 3 to t...Hi, i use CC1310 launchpad and raspberry pi 3 to test that examples.<br />But i met problem when start 6lbr.<br />When i ran "sudo service 6lbr start", its nothing happen (its not show [ok] 6lowpan border router start)<br />And also i cannot access [bbbb::100].<br />My 6lbr.log just show: Thu 5 Oct 11:06:44 ICT 2017 : Starting 6LBR<br />/usr/lib/6lbr/bin/cetic_6lbr_router -c /etc/6lbr/nvm.dat -o /etc/6lbr/nvm.conf -s /dev/ttyACM0 -r -t eth0 -B 115200 -U /usr/lib/6lbr/6lbr-ifup -D /usr/lib/6lbr/6lbr-ifdown -w /usr/lib/6lbr/www -L 3 -W /var/log/6lbr.timestamp -P 60 -C /var/log/6lbr.ip -m /usr/lib/6lbr/plugins <br />Contiki-develop-20161222 started with IPV6, RPL<br />Rime started with address 1.2.3.4.5.6.7.8<br />MAC mac_wrapper RDC br-rdc SEC llsec-wrapper NETWORK sicslowpan<br />2017-10-05 11:06:44.775081: NOTICE: 6LBR: Starting 6LBR version 1.5.x (Contiki-develop-20161222)<br />2017-10-05 11:06:44.775422: INFO: ETH: 6LBR watchdog started (interval: 60)<br />2017-10-05 11:06:44.775705: INFO: NVM: NVM Magic : 2009<br />2017-10-05 11:06:44.775719: INFO: NVM: NVM Version : 5<br />2017-10-05 11:06:44.775731: INFO: CONFIG: Loading configuration : /etc/6lbr/nvm.conf<br />2017-10-05 11:06:44.775824: FATAL: CONFIG: Syntax error in /etc/6lbr/nvm.conf at line 1<br /><br />Can you help me to solved this problem? (my rasp pi and my pc are connected to wifi)Anonymoushttps://www.blogger.com/profile/08671752281706599950noreply@blogger.comtag:blogger.com,1999:blog-5616331110146956954.post-68553533048454079922017-06-16T04:50:02.797+08:002017-06-16T04:50:02.797+08:00This comment has been removed by the author.Anonymoushttps://www.blogger.com/profile/12830526777077715688noreply@blogger.comtag:blogger.com,1999:blog-5616331110146956954.post-36039921780969381462017-06-16T00:05:51.948+08:002017-06-16T00:05:51.948+08:00go to /6lbr folder and run "git checkout ff69...go to /6lbr folder and run "git checkout ff69ae4214407eeec4c71f87589ac4bc7d3a8a49". You will get 6lbr version on 2016 Dec. 22th and you can rebuild 6lbr to test again.三妹https://www.blogger.com/profile/09702304615258996189noreply@blogger.comtag:blogger.com,1999:blog-5616331110146956954.post-66424463670363836072017-06-15T23:00:42.459+08:002017-06-15T23:00:42.459+08:00Thank you for the great instruction. I was able to...Thank you for the great instruction. I was able to follow through your post and successfully installed 6lbr on my debian (I am using Beaglebone Black with CC2531 dongle). <br />However, I have a few question to ask. <br /><br />On my nvm data file, it states WSN accpe RA : false and I cannot connect to web-browser using [bbbb:100]. I cannot solve this problem on my own and I am stuck at this step. <br /><br />Hope you can give me any suggestion to solve this. <br /><br />Thank you.Anonymoushttps://www.blogger.com/profile/12830526777077715688noreply@blogger.comtag:blogger.com,1999:blog-5616331110146956954.post-6223050894372981022017-05-14T09:16:52.692+08:002017-05-14T09:16:52.692+08:00Do you following all the steps exactly?Do you following all the steps exactly?三妹https://www.blogger.com/profile/09702304615258996189noreply@blogger.comtag:blogger.com,1999:blog-5616331110146956954.post-7180133039840474912017-05-14T02:56:21.810+08:002017-05-14T02:56:21.810+08:00Hey, im found of your amazing works at developing ...Hey, im found of your amazing works at developing and sharing your research with community.<br /><br />But can i have a litte tip? I cant really start my 6lbr cuz when i ty "6lbr start" stuff at my console at first it says that there is no such thing as 6lbr.service, and after rebooting it gives no output at all. [bbbb::100] doesnt work in both cases. So, any suggestions?Anonymoushttps://www.blogger.com/profile/11542342522772308184noreply@blogger.com