Friday, March 3, 2017

How to run Contiki udp-server/udp-client on LAUNCHXL-CC2650.

The following steps show you how to run Contiki udp-server/udp-client on LAUNCHXL-CC2650.

1. Do "make TARGET=srf06-cc26xx BOARD=launchpad/cc2650 udp-server.bin" under /contiki/examples/ipv6/rpl-udp to build udp-server.bin and download it to one of LAUNCHXL-CC2650 using Flash Programmer 2.


2. Do "make TARGET=srf06-cc26xx BOARD=launchpad/cc2650 udp-client.bin" under /contiki/examples/ipv6/rpl-udp to build udp-client.bin and download it to another LAUNCHXL-CC2650 using Flash Programmer 2.

3. Start 6lbr on Raspberry Pi or BeagleBone and power on udp-server and udp-client on two different LAUNCHXL-CC2650. You will see two LAUNCHXL-CC2650 show on sensor list of 6lbr web page.


4. On UART output of two LAUNCHXL-CC2650, you can see udp-client sends Hello messages to udp-server.

2 comments:

  1. 这么棒的博客,赞一个!我在使用contiki和6lbr的过程中遇到一些问题,想请教一下你,请问能不能把你的邮箱地址告诉我,我发邮件详细描述下遇到的问题。谢谢啦!

    ReplyDelete
  2. I would like to thank you for the efforts you have made in writing this article. I am hoping the same best work from you in the future as well. In fact your creative writing abilities has inspired me to start my own BlogEngine blog now. Really the blogging is spreading its wings rapidly. Your write up is a fine example of it.server hp

    ReplyDelete